10/100Mbps, single fiber converter adopt WDM technique ,so transmitting and receiving on one same roof of fiber and save fiber consumption can be wide use on limited fiber resource, rent other people's fiber optic or two cores fibers to have one breakdown of an emergence situation .It is excellent product for broadband long distance transmit. network.

Gigabit Ethernet media converter's FX port or TX port according to the IEEE802.3 with IEEE802.3ab standard, working rate is 1000Mb/s.The transmission distance is one single mode fiber can reach 25km. Used on gigabit Ethernet net equipment connection by self converter to extend transmission distance and extension broadband to 1000M. network.

The 2U Rack Mode Ethernet Converter with special module can be plug in or out with electrified cable .It use the standard 19''(2U) structure. It contains16 pieces 10Mbps or 100Mbps modules. The way of power supply can increase stability and reliability of system, fits for various request of wiring net by using high stable power.

The Media Converter Rack is a management system, the whole Rack support 16 Media Converter modules and 1 Agent module (optional, Agent), every module can work independently. The Rack adopts the communication isolation technology to completely separate the system power supply from the Media Converter modules, which ensures the reliability of the whole system.

Adopt several international patents pre-distortion dealing technology to guarantee the fine non-linear index. Adopt famous brand 1550 nm DFB laser instrument guarantee low noise, high power and high dependability. Can initiate the mode SBS function, offer more elastic disposition. Adopt Automatic Gain Control design, make different RF input level keep about equal output performance still, Simplify installing and operation sequence. The built-in microprocessor offers fine control performance and state to show that is controlled. RS485 controls the interface to control by carrying on the remote state. 19" 1U high-standard framework type installation.

Imported erbium-doped fiber, and high steady imported 980nm pump laser or 980nm cooperating 1480nm pump (double pump structure), so noise is lower. Microprocessor automatic control circuit makes both pumps work at best state. Dependability and stability are better. Front panel blue VFD display, shows various main work status parameters. Various output power for selection. RS485 control interface can realize network management status monitor. 19" 1U high-standard framework type installation. With advanced circuit design, reasonable structure, slap-up material and high index, this machine is suitable for using at large or middle-size network.

Adopt word-famous company (AGERE, Fujitsu or selected by user) advanced DFB laser instrument; max output optical power reach 30mW. Add advanced RF pre-distortion circuit, to use as proofreading CATV system most important CTB and CSO index, and to improve C/N index. Adopt RF digital automatic control technology. It can automatically adjust drive level and make C/N, CTB, CSO index always in best state based on input RF level, number of channels. Adopt high performance Gallium Arsenide RF amplifier, let index higher. Built-in perfect power output automatic control circuit and laser thermoelectricity refrigeratory temperature automatic control circuit, insures highest output index and longest life. Built-in microprocessor automatic control circuit makes DFB laser always in best work state. Front panel blue VFD display, shows various main work status parameters and realizes automatic fault alarm and network management monitor.

Each module independent receive and amplify. Output level is independently adjustable. 19" 1U standard case installation. Build integrated bi-directional alternation system for user. Adopt U.S. E-O or PHOTON optical receive parts with small distortion and high sensitivity. Adopt Philips microwave tube push-pull amplify circuit with high index and good C/N.

Mini FTTH optical receiver. Frequency bandwidth: 5-862MHz. Two LEDs in the front panel indicate the input power. High range switching power supply. Adjustable attenuator (-15~0dB). Adjustable equalizer (-15~0dB). 2 output ports or 1 outpt and 1 test point -30dB. Model 220 and 60V.

high quality PIN-diode optical receiving module. Four-stage input level LED display. Wide range of input optical power. PHILIPS Power Doubler output module. Two outputs with plug-in splitter. Plug in return path module. Models with local and remote powering. Switch-mode power supply. weatherproof and RF-screened die-cast housing.

High quality PHOTON optical receiving module. Four-stage input level LED display. Wide range of input optical power. PHILIPS Power Doubler output module. Two outputs with plug-in splitter. Plug in return path module. Models with local and remote powering. Switch-mode power supply. Weatherproof and RF-screened die-cast housing.

High quality PHOTON or PHILIPS optical receiving module. Four-stage input level LED display. Wide range of input optical power. PHILIPS Power Doubler output modules. Four outputs with plug-in splitter. Plug in return path module. Models with local and remote powering. Switch-mode power supply. Weatherproof and RF-screened die-cast housing.